|
|
|
|
Joined: Jul 2004
Posts: 87
Member
|
OP
Member
Joined: Jul 2004
Posts: 87 |
I have a customer that purchased a used IPO 403 off the internet. I know, bad idea, but none the less, they did it as a backup to their existing 406. Problem is, I can't access it to program it. There is an IP address posted on the front of the control unit, but that did not work.
I also tried the default IP address according to the documentation I have (192.168.42.1) and that didn't work either. Any ideas on how to "hack" into the machine to program it, or how to factory reset it?
Thanks.
|
|
|
|
|
Joined: Nov 2005
Posts: 828
Member
|
|
Member
Joined: Nov 2005
Posts: 828 |
System documentation provides specific instructions on DTE reset. Be sure to follow docs to the letter.
Mike
|
|
|
|
Forums84
Topics94,282
Posts638,761
Members49,764
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (EV607797, Toner),
78
guests, and
112
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
