Ok..Here we go again..I've been to this site now 2 times.I'm replacing a standard T1 with a PRI.
the T1 works perfect..I can't get the D-Channel from the carrier (Broadview)On the PRI.They insist I have something wrong ."But I Dont"..They have 5ESS programmed But they haven't a Clue what AT$T Custom is...They have sent a Broadview Tech to meet me and he can Produce a call with a T-Bird HELP !!!

Are they using NI1 or NI2.
Magix only likes NI1 for PRI.

Michael...You say Magix Only likes NI1...Hummm I have magix on AT&T Custom all over the place and also U-459 (DMS-100) ???

Magix only likes NI1 if using National protocol. It does not like NI2. National and Custom are two different protocols.

We have never had any luck with a PRI coming in via NI2 on a Magix/Legend.
A plain ole T-1 will work with pretty much anything and anybody.

OK Thanks ...I'm going with NI1..I'll report back..Again,Thank You

One thing to keep in mind is that not all CO switches can/or will talk NI1 with a PRI.
Good Luck.

Vance,
T-Bird doesn't prove nothing. I did it twice with Fiber PRI. Provider was set up for AT&T protocol which they claimed to be Custom but we couldn't make it to work. Third time Level 2 support changed something and T1 came up. They didn't want to tell me what was wrong on their side but they made it to work. Tell the guys at the switch side ask Level 2 support what is 5ESS Custom protocol is and you will be fine. The only one thing you have to remember that if TEI set to anything different then 0 your D-channel will not work.

Ok..another Pri Up and running..NI1 worked Perfect..Again caller Id was an Issue,But we sorted it out.. Thank You for all your Help..