|
|
Joined: Dec 2008
Posts: 48
Member
|
OP
Member
Joined: Dec 2008
Posts: 48 |
Ok..Here we go again..I've been to this site now 2 times.I'm replacing a standard T1 with a PRI.
the T1 works perfect..I can't get the D-Channel from the carrier (Broadview)On the PRI.They insist I have something wrong ."But I Dont"..They have 5ESS programmed But they haven't a Clue what AT$T Custom is...They have sent a Broadview Tech to meet me and he can Produce a call with a T-Bird HELP !!!
|
|
|
|
|
Joined: Jun 2001
Posts: 10,949
Moderator-Avaya
|
|
Moderator-Avaya
Joined: Jun 2001
Posts: 10,949 |
Are they using NI1 or NI2.
Magix only likes NI1 for PRI.
Avaya SMB Authorized Business Partner. ACIS/APSS ESI Certified Reseller/Installer www.regal-comm.com
|
|
|
|
|
Joined: Dec 2008
Posts: 48
Member
|
|
OP
Member
Joined: Dec 2008
Posts: 48 |
Michael...You say Magix Only likes NI1...Hummm I have magix on AT&T Custom all over the place and also U-459 (DMS-100) ???
|
|
|
|
|
Joined: Aug 2004
Posts: 9,159 Likes: 16
Admin
|
|
Admin
Joined: Aug 2004
Posts: 9,159 Likes: 16 |
Magix only likes NI1 if using National protocol. It does not like NI2. National and Custom are two different protocols.
|
|
|
|
|
Joined: Jun 2001
Posts: 10,949
Moderator-Avaya
|
|
Moderator-Avaya
Joined: Jun 2001
Posts: 10,949 |
We have never had any luck with a PRI coming in via NI2 on a Magix/Legend.
A plain ole T-1 will work with pretty much anything and anybody.
Avaya SMB Authorized Business Partner. ACIS/APSS ESI Certified Reseller/Installer www.regal-comm.com
|
|
|
|
|
Joined: Dec 2008
Posts: 48
Member
|
|
OP
Member
Joined: Dec 2008
Posts: 48 |
OK Thanks ...I'm going with NI1..I'll report back..Again,Thank You
|
|
|
|
|
Joined: Jun 2001
Posts: 10,949
Moderator-Avaya
|
|
Moderator-Avaya
Joined: Jun 2001
Posts: 10,949 |
One thing to keep in mind is that not all CO switches can/or will talk NI1 with a PRI.
Good Luck.
Avaya SMB Authorized Business Partner. ACIS/APSS ESI Certified Reseller/Installer www.regal-comm.com
|
|
|
|
|
Joined: Feb 2007
Posts: 2,473
Member
|
|
Member
Joined: Feb 2007
Posts: 2,473 |
Vance,
T-Bird doesn't prove nothing. I did it twice with Fiber PRI. Provider was set up for AT&T protocol which they claimed to be Custom but we couldn't make it to work. Third time Level 2 support changed something and T1 came up. They didn't want to tell me what was wrong on their side but they made it to work. Tell the guys at the switch side ask Level 2 support what is 5ESS Custom protocol is and you will be fine. The only one thing you have to remember that if TEI set to anything different then 0 your D-channel will not work.
|
|
|
|
|
Joined: Dec 2008
Posts: 48
Member
|
|
OP
Member
Joined: Dec 2008
Posts: 48 |
Ok..another Pri Up and running..NI1 worked Perfect..Again caller Id was an Issue,But we sorted it out.. Thank You for all your Help..
|
|
|
|
Forums84
Topics94,291
Posts638,805
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
![[Linked Image]](https://sundance-communications.com/forum/images/559.jpg)