|
|
Joined: Nov 2007
Posts: 2
Member
|
OP
Member
Joined: Nov 2007
Posts: 2 |
Hi,
I have a Mitel SX-50 that is currently in Ground Start Mode. We are having new lines installed that are Loop Start. Can someone give me steps I need to do to change the programming to Loop Start for this system? Really could use this information asap.
Thanks
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Jul 2001
Posts: 1,985
Moderator-Mitel, NEC, Vodavi
|
Moderator-Mitel, NEC, Vodavi
Joined: Jul 2001
Posts: 1,985 |
I would advise you to get a manual & read up a little. System programming is needed & you need to ID the slot to get the trunk numbers. After that it is simple.
|
|
|
|
Joined: Nov 2007
Posts: 2
Member
|
OP
Member
Joined: Nov 2007
Posts: 2 |
Thats the issue, I dont have a manual for this system. From what I have read on the net, its option 501-580 register 2 option g needs to be changed from 1 to 0. My trunk cards are in the last two slots. With this information, can anyone give me a step by step how to do it?
|
|
|
|
Joined: Oct 2004
Posts: 1,057
Member
|
Member
Joined: Oct 2004
Posts: 1,057 |
|
|
|
Forums84
Topics94,297
Posts638,858
Members49,769
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
108
guests, and
264
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|