atcomsystems.ca/forum Forums TDM Business Telephone Systems Inter-Tel Telephones & Systems Least Cost Routing - Intertel

How do you program least cost routing b/w multiple nodes?

Here is what I've done...
Node 1:
1. Creat a LCR Facility Group for each Node 1, 2 and 3.
2. Created a Routing Group for each Node 1,2 and 3. With in the Routing Group under Facility Group, I added the Facility Group

Node 2:
Same as above

Node 3:
Same as above

I am not doing something right because when I place a long distance call the "1" is not disappearing from the dial number. I was informed the "1" should drop off the dialed number. Please help!

Thanks!

Do you mean the "1" is not dissapering from the phone's display? Or when node x makes a long distance call that should be local to node y, and go out y's trunks, it still adds a 1 which screws things up?
If it's the last one, remove the ECHO TOLL FIELD from the dial rule for that facility group. That should do it. By default the dial rules echo everything you enter and place it on the line.
Use SMDR to verify exactly what it's dialing.
good luck.

Yep, your right. Thanks!