|
Joined: Apr 2007
Posts: 610 Likes: 1
Member
|
OP
Member
Joined: Apr 2007
Posts: 610 Likes: 1 |
Customer has a MICS with a NAM. About once a week when a caller tries to leave a message they get "the message storage unit is full". This is a nursing home and using DID's. Is there a way to check which mailbox is maybe overloaded? Thanks.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
Joined: Oct 2012
Posts: 251
Member
|
Member
Joined: Oct 2012
Posts: 251 |
Almost always turns out to be the general delivery mailbox. There is a Mailbox Activity Report you could run to determine if there are any other mailboxes that are using up the storage.
|
|
|
|
Joined: Jan 2004
Posts: 6,648
RIP Moderator-Nisuko-Tie, General
|
RIP Moderator-Nisuko-Tie, General
Joined: Jan 2004
Posts: 6,648 |
I had the same issue recently , we wound up defaulting and re programming the CP
Skip ------------------------------------
Serving SW and West central Fl since 1984
|
|
|
|
Joined: Apr 2007
Posts: 610 Likes: 1
Member
|
OP
Member
Joined: Apr 2007
Posts: 610 Likes: 1 |
I checked mailboxes 100, 101, 102, Nothing there. Ken, how would I run that report? Thanks.
|
|
|
|
Joined: Jan 2004
Posts: 6,648
RIP Moderator-Nisuko-Tie, General
|
RIP Moderator-Nisuko-Tie, General
Joined: Jan 2004
Posts: 6,648 |
you need to log into the CP via PC interface to see what's going on and run reports.
Skip ------------------------------------
Serving SW and West central Fl since 1984
|
|
|
|
Joined: Feb 2005
Posts: 1,615
Member
|
Member
Joined: Feb 2005
Posts: 1,615 |
It's a NAM not a Callpilot so you will need to hook up to the port with Hyperterminal then run a report from 983/7 or run reports from within Hyperterminal by logging in via Hyperterminal. You can also connect laptop to network card and use Norstar Voice Manager software (included with NRU software).
Also try from a set just going into Mailboxes/Del and keep pressing Next until you see one that is not on the list of users and delete them.
|
|
|
|
Joined: Oct 2012
Posts: 251
Member
|
Member
Joined: Oct 2012
Posts: 251 |
Curly is right, the only access to reports in the NAM is connecting via hyperterminal - Best if you have an old laptop with a db9 connector, I've had issues in the past trying to use a usb to serial connector...
|
|
|
Forums84
Topics94,291
Posts638,806
Members49,767
|
Most Online5,661 May 23rd, 2018
|
|
2 members (Toner, justbill),
170
guests, and
398
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|