|
|
Joined: Nov 2004
Posts: 3
Member
|
OP
Member
Joined: Nov 2004
Posts: 3 |
I am replacing an old Siemens 232 switch with an analog sx200. I have most of the programming figured out, but am having problems setting up the trunk x-connect fields and trunk card option switches. Software is 217, and trunk cards are 211. I do not need to use power failure, I have an emergency manual toggle switch to handle the 2 incoming lines. I have documentation on CD, which is rather cumbersome to use. The cabling diagrams show T1R1 XT1XT2 T2R2 for each trunk port. I have attempted to connect to T1R1, but get a sieze failure. They are ground start trunks. Any suggestions? I am considering connecting to T2R2. Thanks
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,290
Posts638,801
Members49,767
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
102
guests, and
418
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|