Alright, I changed the IP address on my computer to .2. IMAT still will not connect. I can not ping. Lets start from scratch.
I have done the following:
1. Make sure that the IP address on the PRI card is 192.168.1.1 with a default gateway of 192.168.1.251 as instructed in the IMAT help section.
2. I have changed my IP address to 192.168.1.2 and have the default gateway set as 192.168.1.251 as well. IMAT will still not connect.
3. I have a cross over cable that shows me link/activity when connected to the PRI card. I am reasonably sure that the cable is good.
Any other ideas or anything seem off about what I have described?
