|
|
|
|
Joined: Jun 2003
Posts: 117
Member
|
OP
Member
Joined: Jun 2003
Posts: 117 |
The Pri is working,and is used for outgoing(PriA)But when I went into Terminals & Sets/ Line access/Line assignments/Show line,the target lines disappeared from every set & fax that had target lines assigned to them.
While the system was in this situation,they were still able to call out and calls did go to reception on their main line via the Intercom.
The Rec'd # under Lines (4-DIDGETS) for the target lines was still intact through all this and I simply had to reassign all the target lines to the sets and fax machines.I hope this info helps to try and figure out what happened here...Mike
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
Forums84
Topics94,294
Posts638,834
Members49,768
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
161
guests, and
328
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
