I thought i had this one licked, but have ran into one other snag maybe someone can help me with. I have a small sytem using PRI and DID's . The customer wants thier private DID's to ring on thier phones and CFB/CFNA to VM. No problem, but they also want thier 2 main lines to ring on those phones as well and CFNA to the AA after 4 rings. I thought I had found a way around it using a hunt group for the main lines, which does work but I have found that if two calls ring in at the same time, the 2nd call will not ring the hunt group, but will go to the AA after the 4 rings. The sets assigned to the hunt group do not ring for the second call. I have it set for broadcast mode, If busy=busy tone. Any suggestions welcome.