|
|
|
|
Joined: Jan 2005
Posts: 3
Member
|
|
Member
Joined: Jan 2005
Posts: 3 |
Working on a meridian 4X8, One extension does not have a intercom button, some how it has been erased. How can I reprogram it. Thanks for any help on this subject!
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Aug 2004
Posts: 1,747 Likes: 49
Admin
|
|
Admin
Joined: Aug 2004
Posts: 1,747 Likes: 49 |
Go to "Sets & Terminals" in programming, find the extension and turn on at least one intercom button under "Line Access." If you don't know the DN or can't figure it out, trace the phone back to it's port on the KSU and go to "Maintenance" in programming then "Port/DN Status" to match the port to a DN.
![[Linked Image from web.atcomsystems.ca]](https://web.atcomsystems.ca/pic/atcom_logo_60px-high.png) Looking for a VoIP Phone Canada provider? Put Atcom's valuable VoIP expertise to work for your business today!
|
|
|
|
|
Joined: Nov 2003
Posts: 1,313
Member
|
|
Member
Joined: Nov 2003
Posts: 1,313 |
feature *0 may tell you the dn number (although never tried it on a set without at least 1 intercom button. the 7101 sets will show it automatically)
|
|
|
|
|
Joined: Jan 2005
Posts: 3
Member
|
|
Member
Joined: Jan 2005
Posts: 3 |
I had checked programming on that extension, it has 1 intercom button access, I even programmed it to have two just to see if I could get it to work. Feature *0 shows that it is a blank key and when I reset the cabinet feature *0 shows it to be a zone page button. This is an old unit, the software cartridge has 1988 as the year of manufacture. I have entered the config mode to do all my programming, but I do not see a maintenance section on this unit. I do know what dn that it should be, dn 23. Thanks for your time on this, I'll let you give it some thought, maybe I'll have to reset the software and start from scratch.
|
|
|
|
Forums84
Topics94,526
Posts640,017
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
