|
|
Joined: Mar 2005
Posts: 1
Member
|
OP
Member
Joined: Mar 2005
Posts: 1 |
Hi guys, I cannot seem to get into the call pilot I have it puched down on the block and I am connected by a serail cable to the com port. The system just seems to keep reebooting itself. I have tried to connect thru the ethernet port using a crossover cable but for some reason I am not getting in. I can connect directly from my ethernet port on my laptop to the ethernet port on the callpilot Right? or do I have to go thru my lan as long as the ip's are configured. I'm doing it directly and I can ping the factory address of the call pilot but the call pilot interface doesn't come up.Where am I going wrong? and does the call pilot have to be punched down to get configured. Does it have to be punched down to a specific spot? Please help me? oh yeah and its MICS 5 or 6.1
------------------ You are not your problems
[This message has been edited by kennye (edited March 21, 2005).]
You are not your problems
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
Forums84
Topics94,284
Posts638,772
Members49,765
|
Most Online5,661 May 23rd, 2018
|
|
|
|
|