|
|
Joined: Dec 2002
Posts: 348
Member
|
OP
Member
Joined: Dec 2002
Posts: 348 |
I'm trying to setup a Flash VM on an old 308 (DR5). Every thing seems to be working OK except for external transfer. I need to set up the CCR tree 1, path 1 for external tranfer to a cell phone. I set path one to access pool a, I set the phone number to the cell phones number. I get a recording saying "the line or line pool configured for this call is not valid"
I can hook up an M7208 to that port, hit intercom, 9, and the cell number and get out, no problem.
Through the Flash, I see it access the line. I've added 2 pauses before and 3 pauses after the number. The cell phone actually rings and we can answer it, then the VM drops the call and repeats the message "...invalid"
Does anyone have any suggestions???
Never blame on malice, what can be adequately attributed to STUPIDITY!!
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
Forums84
Topics94,284
Posts638,772
Members49,765
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
125
guests, and
346
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|