|
|
Joined: Oct 2006
Posts: 1,386 Likes: 6
Member
|
OP
Member
Joined: Oct 2006
Posts: 1,386 Likes: 6 |
You guys rock! I love this board.
It turns out there was a phone set to CFB to VM. (Thanks Marv). I initially programmed the first set to forward to VM, then copied the set programming to all dn's. Then, when I got to programming the CCR tree, I turned off the forward on busy on each dn.
When I was programming and testing, I plugged a phone into a temporary jack I installed on the sets block, right after the last dn I had programmed. So . . . my test phone was the set that still had CFB to VM!
Once that programming was cleared up, it works great. Thanks guys.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
Forums84
Topics94,294
Posts638,834
Members49,769
|
Most Online5,661 May 23rd, 2018
|
|
|
|
|