|
|
Joined: Jun 2003
Posts: 18
Member
|
OP
Member
Joined: Jun 2003
Posts: 18 |
BCM 50 2.0 all patches.Installed with pri in second expansion module and keycode.Changed to 8 co port card in mod 2 no keycode change. The first 3 co lines go to voice mail 100%, The last 5 fail. Today, worked till 2pm and tried at 2:30 and failed. Went through all programming at least three times and everything is fine. Went through programming with second tech. Everything is programmed ok, hell it's just a Norstar !!! Leaning towards replacing main mod. My thought is that if the lines rings on the set it will go to vm. The weird part is that this extension worked with the pri. I replaced the mod and the card. Any ideas ? This has been one heck of a trip, but fun.
KenW
New York Telephone 1961-1972 ITT BCS NJ 1972-1987 Johnston Comm NJ 1987- ?
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
Forums84
Topics94,262
Posts638,697
Members49,757
|
Most Online5,661 May 23rd, 2018
|
|
1 members (Curlycord),
142
guests, and
414
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|