|
|
Joined: Jun 2011
Posts: 5
Member
|
OP
Member
Joined: Jun 2011
Posts: 5 |
I have a customer that will have a Modular ICS in each of two adjacent buildings. We can run cable between the two locations. What are the options to connect the two MICS units? I know about using T1/PRI to connect through the T1 provider, but I'm looking for a simple less expensive solution to connect via a cable connection without using T1 cards. Ideally they'd like to be able to dial station to station between the buildings. I've heard you can connect two MICS units via an ATA II on each system with limited functionality, but don't know how that would work. Any help?
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
Forums84
Topics94,284
Posts638,772
Members49,765
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
125
guests, and
346
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|