|
|
Joined: Jul 2011
Posts: 2
Member
|
OP
Member
Joined: Jul 2011
Posts: 2 |
Hello
Hope you are well!
I would need some information in regards to what I need to install a MICS. I have a MICS and I would like to install it in our shop Here is the description of the kit.
NTBB41FB-93 X 1 Nortel Fiber Station Module 0x16
NTAB9865 X 1 Norstar CallPilot 100 NT5B82CK X 1 Software Mail Box
NTBB20FB Nortel 12 X 1 X 0 Fiber Trunk Module With NT5B41GA X1-93 4-Port Caller ID Trunk Card DS
NT7B53FA-93 Modular ICS X 1 Nortel 0x32 Key Service Unit NTBB08GA-93 Norstar MICS NVRAM X 1 R1 NT7B66DQ X 1 Software for Phone System Version 6.1 NTBB02GA-93 X 1 2 Port Fiber Slim Expansion Cartridge NT5B41GA-93 X 2 4-Port Caller ID Trunk Card DS
There is a sign on the module that resembles a phone and a kind of pole and line with a telephone and speaker, I am thinking this is the cable line and outs for individual stations? I currently have several telephones model number: Nt2n41aa114 (Bell Telephone) can these work with this system?
Also, there is a voice mail along with several plugs, 1, 2 and an Ethernet plug, where must I plug 1 and 2? And finally, I currently own a 110 Block Wiring Hub can I still use it with this system?
Thanks in advance for your time
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
Forums84
Topics94,288
Posts638,794
Members49,767
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
161
guests, and
411
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|