|
|
|
|
Joined: Aug 2003
Posts: 1,281
Moderator-Telrad
|
Moderator-Telrad
Joined: Aug 2003
Posts: 1,281 |
Make sure your DID conversion is set to yes in tie/DID group features.
If this is not set to yes the system will look at the flexible numbering plan. So some DID's will work but others might not. If you look at the DID that doesn't work it might have a conflick with something in that plan but one's that do work don't have a conflick.
If this setting is set to no DID look at the FLNP Plan 1ST then looks at the DID Table.
Also when you call the DID's that don't work do they go to the ATT. If they do I would link to the T-1 or PRI card and do a trace on it.
If thay don't check that setting.
[This message has been edited by tony3866 (edited March 10, 2005).]
[This message has been edited by tony3866 (edited March 10, 2005).]
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Forums84
Topics94,291
Posts638,815
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
133
guests, and
341
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
