If the light is green but it doesn't ring, it sounds like a bad phone, or possibly a bad card. Lines programmed for delayed ring will blink red until the delay is up then change to green and start ringing.

To clarify things, in program 81 the co lines start at the bottom (int button) and go up, so int button programs line 1, line 1 button programs line 2...

Door should be programmed like any other co line.

Also, check program 39 (button mapping) just to make sure the buttons are programmed right.

Joe
---
No trees were harmed as a result of this posting; however, many electrons were severely inconvenienced.