|
|
Joined: Nov 2010
Posts: 47
Member
|
OP
Member
Joined: Nov 2010
Posts: 47 |
Having a problem and wonder if anyone else has had this. I have a customer with a 3 cabinet dk424 w/ a c/d proc. I upgraded the s/w to 4.3 and installed a pri circut. Everything work's ok but....the last 32 ports of the system cant call out. They can receive calls. They are all in the 3rd cabinet, replaced cabinet and power supply, also main cabinet and power supply. Initialized system and just programmed pri and phones call out ok. As soon as I uploaded the programming with dk admin, problem happened again, I found if I put a phone number in prg *68-2, the phone's will call out ok, with *68-2 blank no outboud call's. all the other ports work ok. I need some of these phone's to send a seperate number using *69. I dont want to reprogram the system by hand (3 acd group's, many phantoms, etc. etc.) any suggestion's would be greatly appreaciated. Thank's, Dave.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,262
Posts638,697
Members49,757
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
140
guests, and
24
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|