An optional MIFM-U( ) ETU provides detailed outside call records of system
telephone usage to support cost control by identifying telephone users, trunk
usage, and digits dialed. SMDR enables connection of call accounting
equipment to audit local and long distance telephone bills.

Terminal Type:
All Multiline Terminals:
􀀀 Incoming CO/PBX Call
􀀀 Outgoing CO/PBX Call
􀀀 Conference CO/PBX Call
􀀀 Transferred CO/PBX Call
Required Components:
RS-232C compatible printer and RS-232C straight connection cable and/or a
call accounting unit must be locally provided.
MIFM-U( ) ETU
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Data Assignment:
􀀀 Use Memory Block 1-5-02 (SMDR Print Format) to select ALL (default) to
print all digits or MASK to hide the last four digits of a telephone number.
􀀀 Use Memory Block 1-5-13 (Printer Connected Selection) to assign a
Printer for SMDR to operate.
􀀀 Use Memory Block 1-5-14 (Printer Line Feed Control Selection) to select
Printout with (default: YS) or without a return (NO).
None

Use Memory Block 1-5-25 (SMDR Valid Call Time Assignment) to
specify the SMDR Valid Call Time (default: 040s) before SMDR
outputs a record. Incoming transfer or conference calls and outgoing
calls are not output through SMDR until the SMDR Valid Call Time
has elapsed.
􀀀 Use Memory Block 1-5-26 (SMDR Incoming/Outgoing Print
Selection) to assign SMDR to output incoming calls (INC), outgoing
calls (default: OUT), or ALL Calls.
􀀀 Use Memory Block 4-56 (SMDR Telephone Print Selection) to
specify whether (default YES) or not (NO) a call record is printed for
the specified station (S5000 or higher and MIFM Software Version
3.00 or higher).
􀀀 Use Memory Block 7-1 (Card Interface Slot Assignment) to specify
the required MIFM-U( ) ETU.
􀀀 Use Memory Block 7-3-01 [MIF (LCR) Assignment] to specify LCR.
􀀀 Use Memory Block 7-3-02 [MIF (SMDR) Assignment] to specify
SMDR.
Restrictions:
􀀀 Call records are not provided for internal calls.
􀀀 Caller ID name is not printed on SMDR.
􀀀 When Automatic Daylight Saving Time Selection is set to allow and
the system automatically switches the clock for daylight saving time
(S6000 or higher) while on a call, the duration of that call is invalid.
􀀀 When 5-, 6-, or 7-digit station numbers are used, this feature shows
only the last four digits of the extension number.
General:
􀀀 When the printer or other I/O device fails to operate, approximately
100 call records are saved in the MIFM-U( ) ETU buffer. When the
buffer is full, the first call record is lost and the last call record is
stored.
􀀀 Call record data provides the Start Time, Trunk Number, Trunk
Group, Type of Call, Station Number, Duration, Number Dialed, LCR,
Calling Station Number, and Transferred Station Number.
􀀀 The maximum digits allowed for output of a telephone number is 24.

When Printer is assigned, and a printer is not connected to the
system, a PRINTER TROUBLE LCD indication and an audible alert
tone are provided at the first two Multiline Terminals connected to the
system (Stations 100 and 101). When an MIFM-U( ) ETU is not
installed or disabled, no alarm indication is given.
􀀀 When Caller ID is installed, SMDR prints the incoming caller
telephone number when received from the Central Office.

DISA (Both incoming and outgoing) is printed. Format shown is
printed when incoming caller hangs up first. Format is reversed
when called party hangs up first.

SMDR Format Explanation:
A~K are printout items.
􀀀 A Start Date
07 = month
03 = day
98 = year
􀀀 B Start Time
09 = hour
00 = minute
􀀀 C Trunk Information
08 = Route Advance Block
05 = Trunk Group
12 = Trunk Number
􀀀 D Call Type
IC Incoming Call
OG Outgoing Call
ICC Conference on Incoming Call
OGC Conference on Outgoing Call
IT Transferred Incoming Call
OT Transferred Outgoing Call
ITC Conference on Transferred Incoming Call
OTC Conference on Transferred Outgoing Call
􀀀 E Station Number
1 2-digit Station Number in System Programming
2 3-digit Station Number in System Programming
3 4-digit Station Number in System Programming
􀀀 F Transferred Station Number
2 2-digit Station Number in System Programming
3 3-digit Station Number in System Programming
4 4-digit Station Number in System Programming
􀀀 G Call Duration
00 = hour
15 = minutes
32 = seconds
􀀀 H Number Dialed
Maximum of 24 Characters
Incoming Caller ID Number = 9727517622I
Account Code Entry:1234567890
Maximum of 16 Characters
Forced Account Code: A1234567890
Maximum of 13 Characters
If both are entered, SMDR prints the Account Code entry
followed by the Forced Account Code