|
|
Joined: Mar 2005
Posts: 16
Member
|
OP
Member
Joined: Mar 2005
Posts: 16 |
*I'm new to phone programming and I'm having problems with my installation. My basic config goes like this: 0302 - set date and time. 1003 - I setup Day & Night overflow to 700, My trunks use Answer Table 1 only. 8007 - mbx 000. 1801 - Program Extension Names. Access the System Administrator and set Instruction Message for box 000.
Problem - I call in and the phone rings 4 times, the Answer Table picks up, then instead of going to voice mail 000 the phones start ringing again then mailbox 300 picks up. I've reset the system about 20 times now using 9999 and redone the above without change in behavior. Any help would be appreciated by this newbie.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,291
Posts638,815
Members49,767
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
128
guests, and
419
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|