I have an Elite IPK which I recently had our techs install an ESIB(8) and an SLIB(4) into. We already had an ESIB(8) with an ESIE(8) installed which were full, hence the addition of the new ESIB(8).
The tech successfully installed the SLIB. He installed the ESIB, but could get no extensions to work on it. The known good DTerm80's say "initialize" and then go blank. His conclusion was the card was defective. The LED lights up on the card just as the others in the system, but that appears to be the only indicator.
I can only find one other post on here of that happening, and it was mysteriously solved once the user reinitialized the entire system (hard reset w/o battery attached).
My next step is to have the tech order a new ESIB to try. (The tech did not supply the ESIB he installed.)
I have also thought about just swapping the two ESIBs.. but haven't yet. Does anyone have any ideas?
