As i`ve post a few times i`m doing ok with the nec systems but i`ve really hit a whooper. We bought a nec aspire s for our new office off ebay. Some deleted the installer acount so i`m using the admin 1 whic give me very little to work with.. I`ve also started using the aspire pcpro. the system its self is work but for some reason I am only getting lines 1 and 2. out of six lines. i`ve recheck wiring. I`m not using a 25 pair I am using cat5. I`ve wired them in this order. p1=blue p2=organge p3=green p4=brow.

sorta like this 75312468. I have two co cards and i can only get 2 lines on both of them.. I`ve been doing at it for 23hrs.. This is a nursing agency so we need phones =).. i`ve called my local techs but they cant get here untill monday... Is it a programming issue? or a wire issue..

Thanks