I will be programming QSIG on a SV8300 tommorrow to connect to a Nortel System in Perth. The customer advise that irrespective of the number they dial which is 4 digit extension to Perth or Australian full National numbers to use the Tie Line as 1st option and 2nd option to ISDN.How would you program the full Australian numbers listed below on the LCR so it can use the Tie since. CMD 8A4xxx>yyy(8 Digit max):0030

0061 8 9281 9000 – 9999
0061 8 9324 7900 – 7999
0061 7 3858 7000 – 7099
0061 7 3858 7400 – 7599
0061 7 3720 4400 – 4499

Last 4 Digit will be the extension number to Perth and Brisbane.

Thanks

Joe