For reference (in case someone is cruising old threads looking for this info): To change the integration, go to the EZ-MADE SWITCH SETUP screen and delete the current PBX from the "integration type" line.

WRITE IT DOWN FIRST, with any switches or other info that may come after it (such as /AA, etc.)

When you hit "enter," the system will pop up a box that asks, "Is it ... ?" and will keep going through PBX types until you reach the correct one. On that one, indicate "Yes." This should automatically populate the fields necessary for a correct integration with that switch.

If it does not help, change this line BACK to what it said before exactly as it was.

| VBC Salinas | Valley Baptist Church, Salinas - worship and prayer for Salinas California