|
|
Joined: May 2004
Posts: 10
Member
|
OP
Member
Joined: May 2004
Posts: 10 |
I have a Comdial Executech 2000 system. I AM NOT a telephone installer but I am the owner of this system and am responsible for all the programming.
I am trying to connect the KSU to a PC for remote programming. I have the owners manual but still cannot get the remote programming to work.
I have attached an RS-232 Seriel Cable to the Data Port on the Comdial and the other end in to COM1 on the PC. I am attempting to connect using Windows Hyperterminal but can't seem to get a connection.
Does anyone know anything about this? Am I using the correct cable? Is it plugged into the correct port(s)? What settings should I use in Hyperterminal?
Any help will be greatly appreciated.
David
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,290
Posts638,801
Members49,767
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
96
guests, and
400
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|