atcomsystems.ca/forum Forums TDM Business Telephone Systems Comdial Telephones & Systems small office lite ivpc board

You the man Mark!!


I would try and reload before spending the money.

I would copy the whole vm directory to a temp. directory and reload.

I would also save a copy of the autoexec.bat and the config.sys off the root. just to be safe.

or to be real safe load another drive with dos 6.22 and then install the software. If you have the same issue on boot up I would look towards hardware.

voice board or maybe the system just is not seeing the key. maybe a parallel port issue.

If you have an old machine laying around, move the hard drive, key and voice card to it. see if it boots good then.