I just replaced the DCS 70 in our office with a "DCS" (dcs 100).. A much larger system for the simple reason that the BRI kept screwing up data and fax calls half way (even after many cabling changes and setup changes)

The 8MWSLI Card in the system in extensions 217-223 but the analogue phones connected will not "ring". You can dial from analogue equipment connected to the SLI extensions, but the phones don't ring when you call inbound.

ANy ideas? The system was only removed a few weeks back from an old company i worked for and the system definately was working fine.. Only difference is its been reset to factory defaults.

Also, If anyone knows the MMC to change the trunk and extnesion numbers I would be greatful. I can't find it in the manual, even thou I have changed it seeveral times in the past.