web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
Joined: Sep 2006
Posts: 119
Adrian Offline OP
Member
OP Offline
Member
Joined: Sep 2006
Posts: 119
I just replaced the DCS 70 in our office with a "DCS" (dcs 100).. A much larger system for the simple reason that the BRI kept screwing up data and fax calls half way (even after many cabling changes and setup changes)

The 8MWSLI Card in the system in extensions 217-223 but the analogue phones connected will not "ring". You can dial from analogue equipment connected to the SLI extensions, but the phones don't ring when you call inbound.

ANy ideas? The system was only removed a few weeks back from an old company i worked for and the system definately was working fine.. Only difference is its been reset to factory defaults.

Also, If anyone knows the MMC to change the trunk and extnesion numbers I would be greatful. I can't find it in the manual, even thou I have changed it seeveral times in the past.

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Sep 2006
Posts: 119
Adrian Offline OP
Member
OP Offline
Member
Joined: Sep 2006
Posts: 119
Just as a thought after reading up on some other posts, is it possible its a bad wiring of the TAIL? I had to wire the tail myself as they were cut, the way I have wired the tails is all the same and the tails are working on the DLI/ TRK/ BRI OK

Maybe the SLI does not use pin 1/26 , 2/27, 3/28 etc for SLI ??? Any ideas? Maybe someone knows the Pin outs for the SLI side of things, although I would assume its the same!!!

Joined: Aug 2006
Posts: 78
Member
Offline
Member
Joined: Aug 2006
Posts: 78
For changing trunk and extension numbers, go to mmc 724.


Mario Gelinas
IT Technician | Technicien TI

Barrette Structural

555 rang St-Malo, Trois-Rivières, Qc, CA, G8V 0A8
D: 819.374.6061 x2331 F: 819.374.4527
www.barrettestructural.com

Joined: Sep 2006
Posts: 119
Adrian Offline OP
Member
OP Offline
Member
Joined: Sep 2006
Posts: 119
I figured out 724, very different to the old DCS 70.

However Im going to try playing with MMC 208 and 510 in regards to the lack of SLI ringing. Im guessing something may be bad in here.Any thoughts?

Joined: Sep 2001
Posts: 2,329
Likes: 7
pvj Online Content
Moderator-Executone-Isoetec, Samsung
*****
Online Content
Moderator-Executone-Isoetec, Samsung
*****
Joined: Sep 2001
Posts: 2,329
Likes: 7
Are you sure the SLI ports are setup to ring?
Is this problem on incoming calls ,calls transferred to a SLI station or both?If it works fine on an internal call and you can transfer a call OK then you need to add the stations to the ring group for incoming calls.

Joined: Sep 2006
Posts: 119
Adrian Offline OP
Member
OP Offline
Member
Joined: Sep 2006
Posts: 119
No internal calls or the DID make the SLI's ring.. which is a problem for the fax machines. (They dont pick up)

Currently I have just hooked the fax up via an KBD_SLI on the back of the phone in the server room at the office which works fine.

Some background is, I have a Analogue phone hooked up to 224 currently, if i ring it from 201 (digital ext) the phone does not ring. If I answer the call on 224 (which is not rining) i get connected perfectly fine. (too bad i aint telepathic)

im guessing the voltages may be different due to it being a MW SLI and that i need to change it. I would even think i need an RGEN card, but this system used to have a fax machine hooked up to it and was working fine for several years.

Joined: Sep 2001
Posts: 2,329
Likes: 7
pvj Online Content
Moderator-Executone-Isoetec, Samsung
*****
Online Content
Moderator-Executone-Isoetec, Samsung
*****
Joined: Sep 2001
Posts: 2,329
Likes: 7
Are you saying that the system you have now is a iDCS100 or Officeserv 100?In North America there is no 8MWSLI card just a 8SLI card.Did you move this card over from the other system?Maybe it's not compatible.

Joined: Sep 2006
Posts: 119
Adrian Offline OP
Member
OP Offline
Member
Joined: Sep 2006
Posts: 119
Its a "SAMSUNG DCS". Which I think is the equivalent to a DCS 200. THE 8MWSLI has always been in this system. The system has not been altered other than being moved abouot 10kM into my office.

The MW is just a Message Wait for SLI telephones with a MW lamp. Its more old school but hey. 

FYI - You can hear the rockers clicking in the SLI card when you dial the SLI extensions. the "click click click" etc as is normal. The card has no issue making outbound calls.

Joined: Dec 2004
Posts: 4,096
Member
*
Offline
Member
*
Joined: Dec 2004
Posts: 4,096
the click is normal.

have you checked the sli ring type? it should be set to CO ring. are you sure the phone you put on there works. I would put a test set on the pair and see if it rings.

My final thought is you have the pairs punched wrong but thats just a guess.

edited for spelling

Joined: Sep 2001
Posts: 2,329
Likes: 7
pvj Online Content
Moderator-Executone-Isoetec, Samsung
*****
Online Content
Moderator-Executone-Isoetec, Samsung
*****
Joined: Sep 2001
Posts: 2,329
Likes: 7
The ring voltage would be generated onboard the card. Do any of the ports ring ok ?

Page 1 of 2 1 2

Moderated by  nameless, pvj 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,696
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,098 Shoretel
187,710 CTX100 install
186,795 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 8
teleco 4
Who's Online Now
2 members (Professor Shadow, pvj), 168 guests, and 246 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5