We just bought this unit for our office and have installed it with 8 4 lines coming in and 7 extensions. I have read the posts to see how to make the phones ring..I followed the instructions below ..but what seems to happen is that the only phone to ring is the first one that I put in after the #62--if that phone isn't there it rings to the second one that I had input..?? anyway to make them all ring?


1 STATION SHOULD RING IN DEFAULT
FOR OTHERS YOU HAVE TO TURN ON PROGRAMMING IN #20 ON DISPLAY SET
1-#20
2- x-x-x-x-1
3- # KEY THAT OPENS PROGRAMING
THEN #62 -DIS PLAY SAYS DAY RING AASN
4-PRESS CO LINE THAT YOU WANT TO RING
5- PRESS DSS BUTTONS AND LIGHT BUTTON OF PHONES YOU WANT TO RING Dss buttons are the 16 buttons on the left side of the set and each one represents one of
your telephones
6- PRESS #
7 #62 THEN NEXT CO AND REPEAT FOR ALL LINES
USUALLY UP TO 8 PHONES CAN RING \
B4 YOU DO ANY PROGRAMMING MAKE SURE BATTERY JUMPER/SWITCH IS ON ON MOTHER BOARD /LOWER RIGHT