Hi everyone, I found the site earlier today while trying to help my boss troubleshoot some issues we're having with a phone system. It's a tad complex, and I'm very new so I don't know the lingo to use. Please be gentle!

1) A dentist office has an existing analog phone system with 10 trunks and three incoming lines.

2) My boss is installing a new digital system, the Samsung 7100. Per some other threads I read, I thought I would mention we are using no cards of any kind.

3) The trunks are working inside the office, but when we attempt to dial out on any of the four we currently have up, we get the message "All trunks Out of Service".

To the best of our knowledge the system was not reset.

The lines coming in too the service closet run to the old system. My boss is attempting to bridge these over to the new system which is in another closet on the other side of the office.

I should note that he just lost his two experienced techs to the local phone company, and so we are all he's got. He has taken some kind of training course with Samsung (a level one programming course... or something?) but that's all we've got to go on at this point. I have pics of the system if that's allowed in the forum, in order to help me troubleshoot. (If not then I apologize, my intent is not to give away Samsung's information)

Thanks to anyone who can help!