Originally posted by hbiss:
[Provide] a telephone patch panel with patch cords from it as necessary to the ports on the premises wiring patch panel that are for the jacks used for the phones.
Wire the back of the telephone patch panel with individual 4 pair cables as 568A and terminate the other ends (all four pair) on split 66M blocks. You will need two blocks, 6 cables per side. Then what you will do is use cross connect wire to loop all the white/blues together and then over to line 1 on another block with the COs from the cable modem. Do the same with the W/O, W/G and W/Br for lines 2,3 and 4.
Back at eack jack use a splitter to provide 2 separate 6pos/4pin jacks.
-Hal
Seems we are going round and round and round here with the same answer being given. And you are just confirming my observation that all IT guys are lunatics.
-Hal
