I work for a service provider and am trying to assist a vendor in settings for a PRI system. The faxes run off of an 8 port single line card, and the software version is version 5.2f0. The service is running clean out to the PBX, so I am looking for suggestions on specific settings to improve faxing over the circuit, I am pretty certain this will need to be done for the line card. In the past I have been able to back off the gain in the inbound and outbound transmissions and it has helped, does anyone know for certain whether that would be an option here? Voice service is working fine at this time. Fax symptoms are mostly garbled faxes or pages missing from faxes. Are there any know issues with these cards on their d/a converters that would affect the faxing?
Thanks.