|
|
|
|
Joined: Apr 2004
Posts: 2
Member
|
|
Member
Joined: Apr 2004
Posts: 2 |
I work for a service provider and am trying to assist a vendor in settings for a PRI system. The faxes run off of an 8 port single line card, and the software version is version 5.2f0. The service is running clean out to the PBX, so I am looking for suggestions on specific settings to improve faxing over the circuit, I am pretty certain this will need to be done for the line card. In the past I have been able to back off the gain in the inbound and outbound transmissions and it has helped, does anyone know for certain whether that would be an option here? Voice service is working fine at this time. Fax symptoms are mostly garbled faxes or pages missing from faxes. Are there any know issues with these cards on their d/a converters that would affect the faxing?
Thanks.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Apr 2003
Posts: 13
Member
|
|
Member
Joined: Apr 2003
Posts: 13 |
Hi -
It sounds like you have fax modems connected to SLC ports.
On my system, we had problems connecting modems to SLC-16 ports.
We were instructed to add a 150 ohm resister on each side of the cable pair.
For us there was an issue with both the SLC card and the modem tring to control the current on the circuit.
The extra resistance solved the issue.
Good Luck,
Russ
|
|
|
|
|
Joined: Apr 2004
Posts: 2
Member
|
|
Member
Joined: Apr 2004
Posts: 2 |
they aren't using fax modems, just regular fax machines, and they are connected to a 8 port slc card. The troubles don't seem to affect them when on robbed bit T1 but only over the PRI <font face="Verdana, Arial" size="2">Originally posted by rivers17:
I work for a service provider and am trying to assist a vendor in settings for a PRI system. The faxes run off of an 8 port single line card, and the software version is version 5.2f0. The service is running clean out to the PBX, so I am looking for suggestions on specific settings to improve faxing over the circuit, I am pretty certain this will need to be done for the line card. In the past I have been able to back off the gain in the inbound and outbound transmissions and it has helped, does anyone know for certain whether that would be an option here? Voice service is working fine at this time. Fax symptoms are mostly garbled faxes or pages missing from faxes. Are there any know issues with these cards on their d/a converters that would affect the faxing?
Thanks.</font>
|
|
|
|
Forums84
Topics94,526
Posts640,017
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
246
guests, and
39
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
