Thanks to the help here I have got the AA to do what I want it to. However I am still having a couple of problems,
1. the Caller ID doesn't seem to work, I have set name first and number first in MMC119 but it still doesn't show up, does it need a card for caller ID or is it built into the MCP?
2. When I call in and choose any option eg. press 1 for sales it rings the correct extension but if I hang up before it is either answered or goes to voice mail the extension will continue ringing for 3 rings and the line light stays on for 90 seconds after the last ring, during this time you can't make or receive calls on that line.
After looking in the manual about connecting analogue lines to the 8TRK2 card it shows P1 Port as having 4 connections, Pin4 = C.O. TIP Pin5 = C.O. RING Pin7 = PFT TIP and Pin8 = PFT TIP but on P2-P8 Ports only Pin4 & Pin5 are required, so where does Pin7 & 8 on P1 go to as my analogue line is only 2 wires?
Regards,
Del
Last edited by Del; 02/19/13 11:20 AM.
