I've put in dozens of 320's but this is my first time dealing with ezPhone. I followed the installation guide (under SBX 2.0 in Vconnect) and even watched the ezPhone webinar, also on Vconnect. I followed the instructions to a T, but the best I can get ezPhone to do is display a "Line Initialization Fail!" message box at startup. Same result on two PC's I tried this far. I confirmed the PC's ip addresses are in Station IP List, tried disabling Windows firewall, going through all the steps again, and again. The PC can ping the KSU, the ip set in the TSP. PGM 108 has the IP in "Server IP". I also tried copying it to CLI IP but no dice. The gateway is filled in PGM 108 too, the same default gateway the PC's use. Any wisdom from others who have set this up before I try Vertical Tech support? By the way I am using the demo license entered from the maintenance prompt. It says there are 89 days left.

Hackbarth Communications, L.L.C. - Serving South Central Wisconsin's Telecom Needs