atcomsystems.ca/forum Forums TDM Business Telephone Systems Nortel Telephones & Systems nortel mics

Yes I forgot the 4 but seems he meant what I knew lol
Link/Flash + * + 4 + DestCode + Cell#

As mentioned 3 times you need to use a Route, not Pool.

Recap with all of above mentioned:

-You need 4.1 software or above (you still have not confirmed what software you have)
-Build route 010 and tell it to use your existing pool
-create dest code of 7 and tell it to use route 010
-Assign 2 Intercom paths to the DN of ATA
-set Allow Redirect to Yes

Try that and see if still an issue.