|
|
|
|
Joined: Feb 2010
Posts: 11
Member
|
|
Member
Joined: Feb 2010
Posts: 11 |
We are expanding a high school to include K-9, as you can imagine it is quite an expansion! My problem is this; Usually, we tie all the common areas to the O/P of one large amp, and feed this amp with one position of the system. However in this situation we need to keep the various corridors and common areas separate on the PA. This allows the senior high corridors to be paged without disturbing folks in K-3, for instance. The total load with the rooms, corridors and gym paging is too close to 250 watts for my liking so I want to distribute the load between multiple amplifiers like we can with the Dukane MCS 350. Does anyone have any ideas that will allow us to maintain control of individual areas, without destroying the main amp during an all call?
Thanks,
Roddy
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Feb 2010
Posts: 11
Member
|
|
Member
Joined: Feb 2010
Posts: 11 |
Oops, I should have pointed that we have already considered individual amps for each set of corridors and feel that would be a waste, IF there is another solution.
Thanks
|
|
|
|
|
Joined: Jan 2010
Posts: 223 Likes: 1
Member
|
|
Member
Joined: Jan 2010
Posts: 223 Likes: 1 |
Roddy, if there is more than one card shelf, this is called partitioning the card shelves and yes it is possible. Each card shelf would then have it's own amp, thus dividing the load between the amps/shelves. There is an amp partitioning kit that can be ordered from Dukane.
PM sent.
|
|
|
|
Forums84
Topics94,526
Posts640,015
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (RATHER BE FISHING),
428
guests, and
53
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
