Hello all--thank you in advance for any help you might be able to provide. I have a customer with a system that is a NEC Aspire M with a networked Aspire S. The customer has a 16 port VOIP card installed--I have tried everything I can think of and still cannot seem to add any VOIP phones. The error message on the phone display keeps coming up as Capability Exceeded. I have searched online and in the manual and understand that there is a relationship between port assignment and extension, but nothing seems as it should. All MLT phones are working properly, as is everything but the VOIP phones. I have the VOIP card in slot 7 and have programmed the card to the proper IP address (I think). Any help from NEC is out since they won't support this system anymore and I desperately need to get this going for them. Any help would be most appreciated. If there is information that is lacking in this post, please let me know and I will hunt it down and relay it.

Thank you again to those of you out there helping the rest of us poor saps.

--AlliedCo