|
|
Joined: Jan 2008
Posts: 3,821
Retired Moderator
|
Retired Moderator
Joined: Jan 2008
Posts: 3,821 |
The sites should be connected using the LAN/Voip card ip address not the mpb address. This is unlike the Summit system. You use the mpb address for the blf manager but not for phone calls. The system sees the conflict and that is why it will not update. If you do not have an ip address for your voip cards (and they have their own connection) then you need to get a static ip for each system. This address is entered in the gatekeeper settings field along with the subnet, gateway, and dns address if on the public network.
Also the net group to call another system should be the actual group (for the other site) group 0 is for the extensions on the local system..the next group should be the actual group your voip trunks are in...not group 1 that is usually the local lines whether they are cos or pri trunks. The documentation/training is a bit vague about that. In other words if your voip trunks are in group 2 then that is the net group your system would use to call the other system.
Last edited by Derrick; 06/05/16 11:18 AM.
www.myrandomviews "Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about" Retired, taking photographs and hoping to fly one of my many kites.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,297
Posts638,866
Members49,769
|
Most Online5,661 May 23rd, 2018
|
|
|
|
|