You can, but you may have to create a separate entry for each local office code. The ECS has a Trace Route tester in the Optimized Routing section. Do your programming then test outbound with the tester to see if it will work the way you think it should.

You could also try using the OPT wizard in ECS programming, but use care because it might overwrite something you need some other place in programming.

Last edited by JBean3329; 07/27/17 08:06 PM. Reason: spellink
Sometimes the thoughts in my head get so bored, they go for a stroll through my mouth. This is rarely a good thing.