A customer with an Avaya g430 gateway connected to the above module used as a paging interface with a Valcom zone paging setup. When an office worker dials the analog extension used to call this device, no page goes through. The analog extension is working as when I remove it from the module, my butt set will ring and I can answer and hear audio. When connected, I get a short ring burst, then disconnect. No audio input and definitely no output, even with the Valcom removed. This did work up (I am told) until a month or so ago.. Dip switches 1,2 are off, 3,4 are on, 5 is off. Customer had a spare module from another site I tried....same result. Thoughts??


St Petersburg