|
|
Joined: Apr 2016
Posts: 12
Member
|
OP
Member
Joined: Apr 2016
Posts: 12 |
Existing APP Server (1.74) on cix670. adding network ACD using Unifier. App Server is licensed for 3 nodes. I setup the remote node in the unifier config program. When I launch the Unifier status screen the node doesn't show at all. The unifier service is running. Go back in config and the node I created still shows in there but not in the status screen.
It's the only programming I have done so far besides setting up the I/O device in the remote node. I could understand if no data was being received from the remote end but it doesn't even show the node in the status window. Shouldn't I at least see what I already configured?
Dave
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,287
Posts638,787
Members49,767
|
Most Online5,661 May 23rd, 2018
|
|
|
|
|