|
|
Joined: Apr 2011
Posts: 38
Member
|
OP
Member
Joined: Apr 2011
Posts: 38 |
Good evening, I have an interesting issue with our UX500's and myself and our local telephone supplies cannot figure out. We have two systems that are connected via a site-to-site VPN. Once upon a time, we had an office that daily users in it, and we could dial 700 or press the VM button to access the voicemail. However, I went on site today and I was working on setting up a user in that office and set up an In-Skin Voicemail and when I pressed on it I noticed I was getting a fast busy signal. So I tried to dial 700 and again, I get a fast busy signal. Can anyone give me some insight on what settings to check that could cause this issue?
- From the main office I can dial 700 and press the VM key and it works. - I can dial the main office extensions and talk to them - The main office can call my remote extension and it works
Any help would be great. Right now I'm thinking I clear the system and start reconfiguring the system. Rebooting the systems didn't change anything.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,284
Posts638,772
Members49,765
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
103
guests, and
350
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|