I had a strong tone from the 66 punc down to the keystone jack so that eliminated any cut in the wiring. dsy/csu card in router in alarm mode. The smart jack is red in alarm. Used a loop back to test smart jack alarm light went green. Loop back test of keystone jack at wall plate smartjack was red in alarm. cat5 cable white/blue , blue,white and white orange,orange white match same pair colors on cat5 horizontal cable. But on jeystone jack the pairs colors matched with termination points on keystone jack following the 568B standard. I need to know, what pair NUMBER at the jack port number on Smart Jack is the correct pair? I could NOT get the smart jack out of alarm no matter what wire combination. I tried. Thanks
