Back in May when Verizon swapped out my ONT as a part of a service upgrade, the technician used T59 staples to secure the power supply's cables as well as the RG6Q on the backboard. The brand of stapler & staples is ACME
I realize that stapling cables tends to be frowned upon, but, the staples seem to do a good job keeping cables in place, but allowing cables/wires to slide back & forth without any problems.
I went to Lowes and purchased a T59 stapler and a small supply of the staples. I did some test staples of scrap RG6Q and everything seemed fine.
Just wondering if anyone else had used these staples and how did things go
