Okay here is my setup:

I have a legend R7 with 2 PRI circuits. One is dedicated to a modem pool for specialized incbound routing. The other is the admin pool. Last 3 digits 400 is the only inbound going to the console whose extension is 400. All other users are 111 and so on. All users are put in cover group 30 and have their own boxes. They work great. 791 is assigned with overflow to 770 and set for about 5 ring timed delay. Pool 70 is set to 791 in cover.

When system is in night service mode, the night service greeting somes on after 1 ring and all is well. When night service is not on, the phones just ring and ring with no voice mail.

Box 400 is set to COS 15 which is AA1.
400 is not in cover group 30.

Also with the PRI ringing only on 400, I have a problem with getting other phones in the office to ring. To get them to ring, I have 6 extensions set to primary cover 400. This may be the source of my problems.

Maybe rather than trying to fix this, it would be better if we focus on a clean install. How would I best setup for incoming 400 last 3 on a PRI to ring at all MLX stations in the system and also cover those incoming calls with Merlin Mail?

Thanks!