|
|
Joined: Dec 2006
Posts: 64
Member
|
OP
Member
Joined: Dec 2006
Posts: 64 |
Techs, I'm trying to remove a PN. I have 2 carriers on this PN and about 20 boards. All but three boards have been removed from the circuit. I have an anolog board in one carrier and a digital board in another that won't remove. The error I'm getting is board still has translations but I don't see any ports in use. All ports are set to (p) not (u).
Any ideas would be much appreciated.
|
|
|
Forums84
Topics94,262
Posts638,697
Members49,757
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
140
guests, and
24
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|