|
|
Joined: Jul 2011
Posts: 188
Member
|
OP
Member
Joined: Jul 2011
Posts: 188 |
I am driving an Avaya G3siV11 and need some additonal space. So I am changing my TN746's to TN793's.
I have changed out all the ports to "X" and tried to do a "Ch Cir 1" and at the right place replaced TN746 with a TN793, but it keeps telling me I must remove translations. What am I missing?
Thanks
|
|
|
Avaya IP Office Service in Canada
Atcom provides quick and affordable service for your Avaya IP Office business phone system!
Our expert technicians have years of experience installing, upgrading, and troubleshooting IP 500v2 and IPO Server Edition systems.
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2005
Posts: 898
RIP Moderator-General
|
|
RIP Moderator-General
Joined: Sep 2005
Posts: 898 |
Something is still assigned on your 746...Do a "list config bo xxxx" and see if anything shows on it...Also turn off TTI while your doing your conversion as this can mess you up also...then you can turn it back on after your done....
Good Luck
...bob...
Bob Wells
WellComm, Inc.
"As long as nobody's dead or in jail, it can't be all that bad ! "
|
|
|
|
|
Joined: Jul 2011
Posts: 188
Member
|
|
OP
Member
Joined: Jul 2011
Posts: 188 |
Well, I thought of my missing an assignment did a "disp sta por 01c09" and it found nothing.
How do I turn off TTI, and by the way what is TTI?
|
|
|
|
|
Joined: Jul 2011
Posts: 188
Member
|
|
OP
Member
Joined: Jul 2011
Posts: 188 |
Make that "lis sta port 01c09"
|
|
|
|
|
Joined: Jul 2011
Posts: 188
Member
|
|
OP
Member
Joined: Jul 2011
Posts: 188 |
All is better now, you have to put the new board in and wait a bit for the system so shake it's hand, then change the TN746" to "TN793".
Thanks for your help.
|
|
|
|
|
Joined: Sep 2005
Posts: 898
RIP Moderator-General
|
|
RIP Moderator-General
Joined: Sep 2005
Posts: 898 |
Glad you got your problem resolved..."patience is a virture" I guess in this case !! TTI is a feature that allows for end-users to move stations by entering a seperation code before unplugging a station and a merge code when plugging it back in to another port in the system...pretty much a pain. It can cause some problems when trying to replace boards sometimes.
Anyway welcome to the board...:-)
Bob Wells
WellComm, Inc.
"As long as nobody's dead or in jail, it can't be all that bad ! "
|
|
|
|
Forums84
Topics93,967
Posts637,413
Members49,704
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (Curlycord, Bogaard),
103
guests, and
33
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
